Cisco CCNA mock exam questions sample test – Question 351

.You have a Telnet session established with a switch from a router. You would like to maintain that connection while you return to the session with the router, and then easily return to
the switch session after connecting to the router.
What command should you use?

A. x
B. resume
C. suspend
D. shift

Correct Answer: A

Explanation:
After typing the Ctrl-Shift-6 sequence, you can tap the x key and return to the previous session, which in this case was the session with the router. Below is the full sequence of
commands described in this item:
Router1#telnet 192.168.3.3
Tying 192.168.3.3..Open
User Access Verification
Password:
Switch2>x
Router1#
When you desired to return to the session with the switch, you would use the resume command as shown below:
Router1#resume
Switch>
Neither the suspend nor the shift commands are valid commands.
Objective:
Infrastructure Management
Sub-Objective:
Perform device maintenance
References:
Establishing Telnet Sessions>Suspending and Terminating Telnet Sessions